Both Inners & Outers of ball bearing as well as taper rollers
bearing are produced together by the trepanning process from the same bar
within tolerance band of 0.05 mm using automated line and within 0.10mm using conventional route.
This process was developed by us for the first time in small
scale industry sector. This process results in good cost savings & is being
adopted by all bearing companies throughout the globe.
We also use tube(seamless) & forged rolled rings as the input
for making these products.
Forged and turned bearing rings of all types from 30 mm ID to 200 mm OD
Portable spectrometer to analyze RM composition of RM (prior to process) and Finished productas against use of wet
analysis method to avoid any mix-up.
Use of induction bar heater for bar heating against conventional oil fired furnaces.
Provision of infrared temp sensor linked up with bar heater to exercise better control on temp of bar at induction heater
outlet.
Multi station forging press against conventional method of single press for each operation.
Provision of Microscope with image analyzer to analyze microstructure of the product.
Gas fired annealing furnace with complete arrangements to provide spherodised annealed products, Furnace equipped
with PLD controllers for temp controlling, recorders and auto compensation of LPG gas flow to maintain temperature
consistency.
The
Bearing is a machine element used in rotating parts of virtually every
machine. The precision in dimensions form a key factor to the performance
of the machine. Rotation movement is an indispensable characteristic
Click On Products :
